BoonDocker ARCTIC CAT: 2010-11 M8 Pump Gas - Manual (Page 6)

BoonDocker Performance www.boondockers.com 208-542-4411 2010 M8 Turbo Kit Instructions 6
Step 3: Install the Air Density Advantage Kit:
Parts Needed; Tools Needed:
ADA kit bag w/ instructions Basic tool set
Step 4: Installing the Control Box (See Control Box
Instuctions):
Parts Needed: Tools Needed:
Control Box w/instructions Basic tool set
Step 5: Muffler
Parts Needed: Tools Needed:
Muffler Basic tool set
5- 8mm x 25mm Allen head bolts 3” hole saw
Spring tab Die grinder
¼” x ½” bolt with lock nut 2 ¼” hole saw
Muffler support with rubber bumper
2- Aluminum rivets
4- Gold exhaust springs
Turbo oil tank assembly
12” of heat tape
A. Using the provided 12” piece of heat tape.
Wrap the coolant line as shown in picture.