BoonDocker ARCTIC CAT: 2010-11 M8 Pump Gas - Manual (Page 18)

BoonDocker Performance www.boondockers.com 208-542-4411 2010 M8 Turbo Kit Instructions 18
Step 13: Final Touches
Parts Needed: Tools Needed:
Snorkel filter Basic tool set
Oil tube w/dipstick Assembly lube
A. Fill oil tank with 16oz of synthetic 2 stroke
engine oil IMPORTANT: start the sled to
make sure the oil pump is working before
installing it to the turbo.
B. Install the oil hose to the top of the turbo as
shown
C. Clean up and zip tie all hoses.
D. Using the provided size 48 hose clamp, fasten
the snorkel filter to the turbo inlet as shown.
E. Well you did it, good job. Replace the hood
and side panels, oh yeah, and don’t forget to
hold on!!! Thanks for choosing Boondocker
Performance Products.