BoonDocker ARCTIC CAT: 2010-11 M8 Pump Gas - Manual (Page 17)

BoonDocker Performance www.boondockers.com 208-542-4411 2010 M8 Turbo Kit Instructions 17
Step 12: Charge Tube ( If Intercooler kit same process)
Parts Needed: Tools Needed:
2” x 3” black silicone Basic tool set
2” x 2” black silicone
4- Size 32 hose clamps
6.5” of 3/16” hose
2- 4” zip ties
A. Install 2” x 2” black silicone to the Boondocker
airbox and loosely place 2 size 32 hose clamps over
the silicone.
B. Install 2” x 3” black silicone to the turbo charger
and loosely place 2 size 32 hose clamps over the
silicone.
C. Insert the charge tube into the 2 silicone pieces as
shown
D. Tighten all 4 size 32 hose clamps
E. Route the 6.5” piece of 3/16” tubing from the
actuator to the barbed fitting on the charge tube.
F. Zip tie these 2 connections.