BoonDocker ARCTIC CAT: 2010-11 M8 Pump Gas - Manual (Page 8)

BoonDocker Performance www.boondockers.com 208-542-4411 2010 M8 Turbo Kit Instructions 8
E. From the inside of the footrest find the center row in the vertical hole pattern and the
hole in the very bottom of the horizontal pattern. Install the spring tab here using the ¼”
x ½” bolt with lock nut as shown in picture.
F. Trim the hole pattern on the front of the foot rest count 6 holes up on the middle vertical
hole pattern and 5 holes up on the right vertical hole pattern. Fasten the muffler support
bumper here using the 2 aluminum rivets as shown in picture.
G. Trim 3 rounded spots on the foot rest as shown and mount the reverse beeper.
H. Place a bead of high temp silicone around the muffler flange as shown, reinstall to turbo.
I. Install the 5 hole muffler flange to the turbo exhaust housing using the 5- 8mm x25mm
Allen heat bolts. Install the 4 gold springs as shown.
.