BoonDocker ARCTIC CAT: 2010-11 M8 Pump Gas - Manual (Page 7)

BoonDocker Performance www.boondockers.com 208-542-4411 2010 M8 Turbo Kit Instructions 7
B. Using a 3” hole saw make the first cut as shown in picture.
C. Using a 2 ¼” hole saw make this first cut as shown
D. NOTE: You will have to do additional trimming in the holes to get the muffler to fit, use a die
grinder for this step (see below). You can now fit the muffler inside the foot rest.
Be sure to trim here for best fit

3”
1 7/8”
Hole center
hol Center