Installing intercooler (in place of airbox) – BoonDocker ARCTIC CAT: 2010-11 M8 Pump Gas User Manual
Page 5
BoonDocker Performance
www.boondockers.com
208-542-4411
2010 M8 Turbo Kit Instructions
5
D. Reroute the ECU Harness. Be sure the harness
does not rub on the chassis, this can cause a short
in the wiring,
E. Install the Boondocker airbox and fasten it using
the provided 5/16 x ¾” bolt with lock washer.
F. Relocate the ECU as shown in the picture. Be sure
to mount the ECU far enough forward so that the
connectors plug in without hitting the bulkhead.
Use the factory bolts, and the provided rubber
ECU mounts in between the ECU and bulkhead to
dampen the vibration.(DO NOT
OVERTIGHTEN)
Installing Intercooler (in place of Airbox)
Follow step A-E for Airbox. Relocate the ECU to the side of the Intercooler and re locate the
voltage regulator (see pictures). For wiring fan see Step 6 section B
Voltage regulator
ECU