Salter Brecknell SBI140 - Manual (Page 4)

Wa r n i n g s Electrical installation
For your protection, all mains (110V or 230V) equipment used
where damp or wet conditions may occur, must be supplied from a
correctly fused source and protected by an approved ground fault
protection device (RCD, GFCI etc.).
IF IN DOUBT SEEK ADVICE FROM A QUALIFIED
ELECTRICIAN.
To avoid the possibility of electric shock or damage to the machine,
always isolate from the mains power supply before carrying out any
routine maintenance.
Cleaning the scale
Harsh abrasives, solvents, scouring cleaners and alkaline cleaning
solutions, should not be used especially on the display windows.
Under no circumstances should you attempt to wipe the inside of the
machine.
The outside of the machine may be wiped down with a clean cloth
moistened with water containing a small amount of liquid soap.
EMC compliance
The following warning may be applicable to your machine.
WARNING: This is a class A product. In a domestic environment
this product may cause radio interference in which case the user
may be required to take adequate measures.