Salter Brecknell SBI140 - Manual (Page 30)

25
KEY
Ⅹ .Key Definition summary:
MODE DEFINITION
HOLD
/PRINT
Normal weighing mode
Enter or exit HOLD mode; output the
data as per P4,P5,P6 setting
Setup mode/Calibration
mode
Shift the flashed position from right to
left
Displaying A/D code or
input voltage mode
No Function
UNIT
Normal weighing mode
Choose weight units, refer P8, P9,
P10, P11 setting and Table3,Table4.
Setup mode/Calibration
mode
Change the digit on flashed position
and click this button to add 1.
Displaying A/D code or
input voltage mode
Choose the weight inner code or input
working voltage to be displayed.
TARE
Normal weighing mode Tare the weight
Setup mode/Calibration
mode
Confirm the displayed parameters or
input data, and go to next step
Displaying A/D code or
input voltage mode
Choose filtered or un-filtered weight
A/D data
ON/OFF/
ZERO
Normal weighing mode Zero function or Power off the scale.
Setup mode/Calibration
mode/Displaying A/D code
or input voltage mode
Exit and back to normal work mode
ON/OFF/
ZERO
+
HOLD
/PRINT
Normal weighing mode
(more than 3s)
Go to Show A/D code or input
working voltage of indicator mode