Salter Brecknell SBI140 User Manual
Page 16
11
3) P
AB.C
: Item AB parameters and one digit can be input
4) P
AB.CD
: Item AB parameters and two digits can be input
5. Detailed setup:
5.1) P1.xy: Auto-off time xy= 00-15
xy = 00 : means no auto-off function
xy = 01-15: means the scale turns off to save power after 01-15 minutes when
no variety of weight on scale and no key operation.
5.2) P2.x: HOLD/PRINT key function definition
x = 0 : only HOLD function
x = 1 : only PRINT function
x = 2 : HOLD and PRINT function (short-time click the button once for Print
function, and hold the button for several seconds for HOLD function)
5.3) P3.xy: Hold function setting
xy = 0 : No hold function;
xy = 1 : When the scale becomes stable, it will hold the larger weight reading;
xy = 2 : When the scale becomes stable, it will automatically display and hold
the weight reading. When this weight is below 10d, HOLD function
will automatically inactivated. When the new weight is more than
10d, the scale will hold the new weight when stable.
xy=3-50 : When the weight variety is within the setting range +3~50d, the
weight reading will remain unchangeable.
5.4) P4.x: RS232 mode setting
x = 0 : No RS232 function. It will not transmit or receive any data although
the scale is with RS232 hardware. RS232 function can be only
activated when scale is in normal weighing mode.
x = 1: Press PRINT/HOLD key, the scale will output the current stable
displayed weight reading and weight unit, and not receive any data
from other equipment. The output format is as below:
x = 2: Press PRINT/HOLD key, the scale will output the data of stable
current gross, tare, net weight reading and weight unit. The format is