Salter Brecknell SBI140 - Manual (Page 17)

12
as follows:
The number of position used: weight reading ---7;
Minus ---1;
Decimal point ---1;
Weight unit ---2 or 4;
x = 3 : Continuously output of the current displayed reading and unit, and it
does not receive any data. The output format is same as x=1.
x = 4 : Continuously output of the current gross weight, tare weight and net
weight reading data including unit, and not accept any data. The
output format is same as x=2.
x = 5 : When the scale is stable, it will output the current displayed weight
reading automatically one time including unit, and not accept data.
The output format is same as x=1.
x = 6 : When the scale is stable, it will output the current gross weight, tare
weight and net weight data including unit automatically one time,
and not accept data. The output format is same as x=2.
x = 7 : Bio-RS232 data output compatible (8 data) to the NCI-SP1 format.
5.5) P5.x: Baud rate of RS232 communication
x = 0 : 1200bps
x = 1 : 2400bps
x = 2 : 4800bps
x = 3 : 9600bps
x = 4 : 19200bps
5.6) P6.x: RS232 communication data format
x = 0 : 8N1 8 digits, no odd or even , 1 start bit, 1stop bit
x = 1 : 7O1 7 digits, 1 odd, 1 start bit, 1stop bit,
x = 2 : 7E1 7 digits, 1 even, 1 start bit, 1stop bit
5.7) P7.xy: calibration resolution
Table2: