Connecting the camera to a printer – Canon A100 User Manual
Page 94
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Connecting the Camera to a Printer
Two direct interface cables are included with
Canon printers having the direct print function.
Use the DIF-100 cable with the
mark on the
connector when connecting to this camera.
O If you plan to print out many prints in a single
session, it is recommended that you power the
camera with AC power (p. 99) or else load fully
charged NiMH batteries (p. 96) or unused alka
line batteries before you begin.
O Refer to the System Map included with this
camera kit for printer information.
O Please see your printer’s user guide for
instructions on loading paper and install
ing an ink cassette.
1
Turn off the Camera.
Attach the power cable to the
printer and plug the other end into
power supply. Or, install the
printer’s rechargeable battery.
• Depending on the type of printer you have,
it may or may not use rechargeable batter
ies. Refer to your printer's user guide.
69