Canon A100 User Manual
Page 62
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
o
O If the flash is used in macro mode, the light may
not be controlled correctly. In this case, set a
higher ISO sensitivity or use other lightings in
stead of using the flash.
O When shooting with a high ISO sensitivity and
using the built-in flash, there is more of a chance
of overexposure the closer you are to the sub
ject.
O
Please note that a slow shutter speed will be
selected in dark places when the flash is set to
off or slowsynchro. Be careful to avoid camera
blur under these conditions.
• Shooting in [3 Mode
Be careful to hold the camera still to avoid cam
era Shake.
• Shooting in G3 or
m
/ ^ Mode
Fix the camera to a tripod since the shutter
speed will be slower than in the H mode.
If an image is dark in H mode, reshooting in
on mode will make it brighter.
44
OThe flash may take approximately 20
seconds to charge. The LCD monitor, if it is
on, will go off after the indicator flashes
orange while recharging. The LCD monitor
will go back on after the indicator glows a