Select images for transferring, For setting images one by one, For setting all images on the cf card – Canon A100 User Manual
Page 117
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Select images for transferring.
► For setting images one by one
•
Press © or O button to select the image
and mark or remove from images using 0
or 0 button.The check marks are displayed
when set._______
•
Pressing the button allows you to set
with the same method even if changed to
index replay (3-images).
For setting all images on the CF
card
Press the button to switch to index
replay (3-images display).
After pressing the SET button, press 0 or
0 button to select [Mark all]. Press the SET
button again to set for printing all images
one at a time.
This manual is related to the following products: