Reviewing an image right after shooting – Canon A100 User Manual
Page 50
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Reviewing an Image Right After Shooting
The images that have been shot will be
displayed for approximately 3 seconds*, even
when the shutter button is released right after
the image has been taken. You can also check
the image with the following steps.
*The display time can be changed (p.
88
).
• Keeping the Shutter Button pressed.
• Press the SET button while the image is dis
played in the LCD monitor.
Press the shutter button halfway again to stop
displaying it.
O You can erase the images while they are dis
played (p.65).
This manual is related to the following products: