Canon A100 - Manual (Page 133)

Image too large : You attempted to replay an image whose resolution exceeded 3200 x 2400 pixels or
whose file size was too large
Incompatible JPEG format : You attempted to replay an incompatible JPEG file.
Corrupted data : You attempted to replay an image with corrupted data.
RAW : You attempted to replay an image recorded in the RAW format.
Unidentified Image : You attempted to replay an image file recorded in a unrecognized format (file recorded
by a different camera in a proprietary format, etc.).
Cannot magnify! : The image you attempted to magnify was recorded by another camera, or recorded in a
format that cannot be magnified, or edited on a computer.
Cannot rotate! : The image you attempted to rotate was recorded by another camera, or recorded in a
format that cannot be rotated, or edited on a computer.
Protected! ; You attempted to erase a protected image.
Too many marks! : Too many images have been marked for printing. No more images can be marked.
Unselectable image : You attempted to set the print settings for a non-JPEG file.
Exx : Camera malfunctioned. Turn off the power and turn on again, then re-shoot or replay. If
the same message recurs frequently, the camera may be damaged. Note down the error
number [xx] and take the camera to a Customer Support Help Desk. If this message
appears immediately after you have taken a shot, the camera may not have shot the
image. Switch to the Replay mode and check whether the image was actually recorded.
93