Samsung HL-$4676S User Manual
Page 37
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
I Turn off your Cable box.
Setting Up fhe Remote to Operate Your Csble Box
Press the CABLE button on your TV's remote control.
Press the SET button on your TV's remote control.
Using the number buttons on your remote control, enter three
digits of the cable box code listed on page 41 of this manual for
your brand of cable box. Make sure you enter three digits of the
code, even if the first digit is a "0".
(If more than one code is listed, try the first one.)
Press the POWER button on the remote control.
Your cable box should turn on if your remote is set up correctly.
If your cable box does not turn on after set-up, repeat steps 2, 3
and 4, but try one of the other codes listed for your brand of cable
box. If no other codes ore listed, try each code, 000 through 046.
Note on Using Remote Control Modes: Cable Box
When your remote control is in "CABLE" mode, the volume buttons
still control your TV's volume.
English - 37