Samsung HL-$4676S - Manual (Page 34)

Operation
J Press the A or ▼ button to select the
■ ■
'*'+ Antenno connection, then press the
ENTER button.
l|^|i :
Program function.
IX-i 1
• Air : "Air" antenna signal 1..................)
Cable : "Cable" antenna signal ,
.
■ -’I- 1
Air+Cable : "Air" ond "Cable"
antenna signals
When selecting Cable TV system:
Press the ENTER button to start the auto
program. By default, the cable TV system
is set to "STD".
If you wont to select another type of
cable system, press the button and
use the
A
or
T
button to select
"STD", "HRC" or "IRC".
Press the ENTER button.
STD, HRC and IRC identify various types of cable TV systems.
Contact your local cable company to identify the type of cable system
that exists in your particular area.
At this point the signal source has been selected.
our location.
' iJlji'C ..
® ■■
• ar..
Press the ► button to select "Start", then
press the ENTER button to start the auto
program. The TV begins memorizing all
available stations. Press the ENTER button
at any time to interrupt the memorization
process.
Press the EXIT button to exit.
• The TV must be connected to an
antenna in order to receive digital TV
signals. Even if a particular channel
is deleted from the memory, you can
always tune to that channel directly
by using the number buttons on the
remote control.
Auto program in progress.
Calile 26
□ 37%
;:>Toji : :
NOTE
All Qvailoble DTV and Anolog channels are aufomatfcally stored
in memory.
English - 34