Samsung HL-$4676S - Manual (Page 29)

Press the A or ▼ button to memorize
the channels of the selected connection.
Press the ENTER button to select "Start".
• If the antenna is connected to ANT 1
IN ¡CABLE), select "Cable" and if it
is connected to ANT 2 IN (AIR),
select "Air".
• If both ANT 1 IN (CABLE) and ANT 2
IN (AIR) are connected, select the
"Air + Cable".
Selects the antenne to execute the
Auto Program function.
Air : i'Mari.'|
Cable
Air+Cable • rjinit •
Press the ENTER button to stort the auto
program. By default, the cable TV system
is set to "STD".
If you want to select another type of
cable system, press the ◄ button and
use the
A
or
T
button to select
"STD", "HRC" or "IRC".
Press the ENTER button.
• STD, HRC, and IRC identify various
types of cable TV systems. Contact
your local cable company to identify
the type of coble system that exists in
your particular area. At this point the
signal source has been selected.
VW-'vg'.
location.
fr-
HF.C
IF.-:
Auto program in progress.
Cable 26
1 1 37%
The TV will begin memorizing all of the
available channels.
After all the available channels are
stored, the Auto program menu
reappears. Press the ENTER button at
any time to interrupt the memorization
process.
Press the ENTER button, then the menu
to set the clock mode is automatically
displayed.
____ A v T m Piuai
Auto Program is Completed.
14 channels are memorized.
Air: 9 Cable : 5
Press the ENTER button to select "Clock
Mode".
Press the
A
or
T
button to select "Auto"
or "Manual", then press the ENTER
button.
■.■•wij'i) ■ in
Sets the current time manually or automatically.
Clock Mode ■_
M:.':iu«r
Continued,
English - 29