Sony PCV-130 User Manual
Page 26
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Connecting a Camcorder or VCR (AudioA/ideo In)
Connecting a camcorder or VCR enables you to watch, hear, capture, and
edit video on your computer using the built-in TV Player program.
For youf convenience^ your PO includes’ audio and video connectors on both the front and
' back panels, allowing yoa;:t||d|necctpe^^
; : ’ ;
component, use the Front/Rear Control toggle switch on the front panel to select the front or
rear connectorKilhe LEDiindicatorlight is oniwhen thefrorit connecbars areactivaS
1 Locate the audio and video IN connectors on the PC (front panel
connectors .shown below).
^ If your camcorder or VCR has an S-VIDEO OUT connector, you can get better picture
quality by connecting to the PC's
S-VIDEOIN connector instead ofthe composite video
connector. If your video device doesn 't have S-VIDEO or composite AA/connectors,syou
can use a VHF/UHF connection, as described on page 15.
2 Plug the video device’s audio and video OUT cables into the PC’s
audio and video IN connectors.
16