Sony PCV-130 User Manual
Page 175
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Replacing the Lithium Battery
6
Install the new battery with the plus (+) side up.
! There is danger of explosion if you replace the battery incorrectly. You
must replace the battery only with a CR2032 type lithium battery. Discard
used batteries according to tlie instructions on page 184.
7 Reinstall any add-in cards that were removed, and replace the side
panel as described on page 174.
The values stored in the CMOS memory are now reset to the factory default values.
You must run the Setup utility to reset the date, time, passwords, and other options.
See the online System Reference Manual for details.
8
To run the Setup utility, press F3 for a few seconds while rebooting
your PC, then press and hold FI to run the BIOS setup utility.
9 Change the default values to the values you wrote down in step 2.
10
Save your Setup changes, and then exit the Setup utility.
171