Sony MDS-101 User Manual
Minidisc recorder, Son'k
Table of contents
Document Outline
- To prevent fire or shock hazard, do not expose the unit to rain or moisture.
- CAUTION
- Table of Contents
- What Is the MiniDisc?
- Unpacking
- Hooking Up the System
- Setting the Clock
- Playing an MD (Normal Play)
- Playing an MD (Normal Play)
- Playing Tracks Repeatedly
- (Music Scan)
- While the unit is stopped, press M.SCAN.
- Press A.SPACE once.
- To cancel the auto space function
- Digital recording
- ISr-i
- Digital in
- Press REC#(«).
- Press^ll(^orll).
- Play the sound source (CD player, etc.) to be recorded.
- Playing back tracks just recorded
- Analog recording
- Adjusting the recording level
- To protect a MiniDisc against accidental erasure
- finalo9 in
- Automatic track marking
- Manuai track marking
- Set the amplifier function selector to CD.
- For digital recording, press INPUT SELECTOR until "Digital In" lights up.
- Insert a CO into the CO player.
- 5 Select the playback mode (shuffle play, program play, etc.) on the CD player.
- Press CD-SYNC/START.
- Press CD-SYNC/STOP to stop recording.
- To temporarily stop recording
- To check the remaining time on the disc.
- Successive CD synchro>recording of another CD
- 2 Change the CD.
- 3 Press ►" on the remote commander of the CD. Synchfo-rocordir^g restarts.
- Erasing recordings (ERASE Function) (see page 36)
- Dividing recorded tracks (DIVIDE Function) (see page 39)
- Erasing a single track
- Erasing tracks successively
- r !■«■« I I
- Press until “Erase?” lights up.
- Press YES.
- To erase the next track, press until “Erase?" lights up.
- Press YES.
- Repeat steps 4 and 5 to erase other successive tracks.
- To cancel the ERASE Function
- To cancel the ERASE Function
- Press YES when the correct position is found.
- To cancel the DIVIDE Function
- To undo a track division
- Changing the step interval in step 5
- Press until “Combine?” lights up.
- Press YES.
- Verify the tracks, then press YES.
- To cancel the COMBINE Function
- To undo a track combination
- Press or ^ or numeric
- Press until “Move?” lights up.
- 4 Press (
- Press ,43 K i or numeric
- To cancel the MOVE Function
- Press YES.
- Labeling a track
- Labeling a disc
- Specifications
- Display Messages
- System Limitations
- Guide to the Serial Copy Management System
- Index