Sony MDS-101 - Manual (Page 37)

Erasing tracks successively
Use the procedure below while the unit is in stop, playback
or pause mode to erase consecutive tracks one by one.
Press or or numeric
buttons) until the first track to be erased
lights up. ^
^
r !■«■« I I
Example: Erasing track 4
01n 23s 6 7 • 4 10
Press until “Erase?” lights up.
EDIT
NO —
O
KMI
4 Erase ? 6 7 « 9 10
►
ISI
ii. ....
Press YES.
"Complete" lights up for a few seconds then
disappears, and the specified track is erased.
The music calendar decreases by one.
— YES
O
CofiP 1 ete 6 7 • 9 10
11 12 13 14 IS
IMI ii. ....
16 17
The track following the one just erased starts
playing if the unit is in playback mode.
To erase the next track, press until
“Erase?" lights up.
EDIT
NO —
O
•MX
4 Erase ? 9 7 8 d 10
-m-v - -
Press YES.
"Complete" lights up for a few seconds then
disappears, and the specified track is erased.
The music calendar decreases by one.
— YES o
CoriP 1 ete 6 7 6 9 10
11 12 13 14 IS
IS
ii. .
16
Repeat steps 4 and 5 to erase other
successive tracks.
To cancel the ERASE Function
Press ^f5(f or ■ to restore the normal display.
I
Notes
I
If the "Protected" indication lights up
TTie record-protect slot on the disc is open and the specified track cannot be
erased. Erase the track alter closing the slot.
When "TOC” flashes in the display window
Do not jog the unit or pull out the power cord. After the contents of the recording
have been updated, “TOC" lights up. If any changes have been made to an MD, tl
“TOC” indicator lights up. When EJECT or POWER is pressed at this time, the
“TOC" indicator flashes and the actual contents of the MD are updated.
37