Labeling a track, Labeling recordings (title function) – Sony MDS-101 User Manual

Page 44

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Labeling Recordings (TITLE Function)

Use the title function to create titles for your recorded discs and tracks. Titles —
which may consist of up to 100 uppercase and lowercase letters, numbers and
symbols for a maximum of about 1,700 characters per disc — appear in the display

window during MD operation.

Labeling a track

Use this function during playback, pause or recording mode
to label a track.

Repeat step 2 until you have entered the
entire title.

Press NAME again.
The entered title appears on the left side of the
display window and the labeling procedure is
completed.

iNAMEt

DIflRV

Entering lowercase letters

1 Press CAPS until “Selected abc” lights up.
2 Enter the desired characters.

Entering uppercase letters
1 Press CAPS until “Selected ABC” lights up.
2 Enter the desired characters.

Entering numbers
1 Press NUM until “Selected 123" lights up.

2 Enter the desired numbers.
Entering uppercase or lowercase letters again

1 Press CAPS or NUM until “Selected ABC" or

“Selected abc" lights up.

2 Enter the desired characters.

Entering symbols ( * . ? , ¥ , etc.)
1 Press or ► ► on the remote commander to select the

desired character.

2 Press tfc (► ► •)•