Sony MDS-101 User Manual
Minidisc recorder, Son'k
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Table of contents
Document Outline
- To prevent fire or shock hazard, do not expose the unit to rain or moisture.
- CAUTION
- Table of Contents
- What Is the MiniDisc?
- Unpacking
- Hooking Up the System
- Setting the Clock
- Playing an MD (Normal Play)
- Playing an MD (Normal Play)
- Playing Tracks Repeatedly
- (Music Scan)
- While the unit is stopped, press M.SCAN.
- Press A.SPACE once.
- To cancel the auto space function
- Digital recording
- ISr-i
- Digital in
- Press REC#(«).
- Press^ll(^orll).
- Play the sound source (CD player, etc.) to be recorded.
- Playing back tracks just recorded
- Analog recording
- Adjusting the recording level
- To protect a MiniDisc against accidental erasure
- finalo9 in
- Automatic track marking
- Manuai track marking
- Set the amplifier function selector to CD.
- For digital recording, press INPUT SELECTOR until "Digital In" lights up.
- Insert a CO into the CO player.
- 5 Select the playback mode (shuffle play, program play, etc.) on the CD player.
- Press CD-SYNC/START.
- Press CD-SYNC/STOP to stop recording.
- To temporarily stop recording
- To check the remaining time on the disc.
- Successive CD synchro>recording of another CD
- 2 Change the CD.
- 3 Press ►" on the remote commander of the CD. Synchfo-rocordir^g restarts.
- Erasing recordings (ERASE Function) (see page 36)
- Dividing recorded tracks (DIVIDE Function) (see page 39)
- Erasing a single track
- Erasing tracks successively
- r !■«■« I I
- Press until “Erase?” lights up.
- Press YES.
- To erase the next track, press until “Erase?" lights up.
- Press YES.
- Repeat steps 4 and 5 to erase other successive tracks.
- To cancel the ERASE Function
- To cancel the ERASE Function
- Press YES when the correct position is found.
- To cancel the DIVIDE Function
- To undo a track division
- Changing the step interval in step 5
- Press until “Combine?” lights up.
- Press YES.
- Verify the tracks, then press YES.
- To cancel the COMBINE Function
- To undo a track combination
- Press or ^ or numeric
- Press until “Move?” lights up.
- 4 Press (
- Press ,43 K i or numeric
- To cancel the MOVE Function
- Press YES.
- Labeling a track
- Labeling a disc
- Specifications
- Display Messages
- System Limitations
- Guide to the Serial Copy Management System
- Index