Tomei Powered ARMS M8265 Single Scroll - Manual (Page 14)

1. REMOVAL OF THE STOCK TURBO
Disconnect the battery’s negative terminal and refer to the service manual for the removal of the standard turbine.
The items marked with an "X" next to them in the below illustration will no longer be required.
To save time and to avoid mistakes,
make notes on where each part
belongs for the parts that you will reuse.
CAUTION
(X Marks the parts that
should NOT be reused)
Ч
Ч
Ч
Ч
Ч
Ч
Ч
Ч
Ч
Ч
Ч
Ч
Ч
Ч Ч
Ч
14
Inspect the tube for any signs of blockage and or possible
signs of problems.
Thoroughly check the oil inlet pipe to ensure that it has
been cleaned properly and flushed with high pressure air
prior to fitment.
Verify the Banjo Bolt head side oil line
If the bolt is the non orfice type, then change it with
Subaru genuine part 14445AA090.
Orfice Type Bolt No Orfice Type Bolt
SUBARU OEM Part # 14445AA090
14