Canon ImageCLASS MF4570DN - Manual (Page 88)

6-4
U
sing the F
ax F
unc
tions
Specifying Destinations
Specifying Destinations
Specifying Destinations by Entering a Fax Number
Specifying Destinations with the One-Touch Keys
Specify the fax number with the numeric keys, [ ] (Tone),
and [ ] (SYMBOLS).
Press the one-touch key (01 to 04) of the destination.
To use this feature, you need to pre-register destinations in one-touch keys.
“Registering and Editing One-Touch Keys” (P.5-3)
Specifying Destinations Using Coded Dialing
Fax mode screen
Specify destination.
01/01/2011 12:52AM
Sharpness: 0
Specify Destination
+
-
Setting screen
Specify Destination
Fax (New)
Address Book
Coded Dial
Enter the three-digit registration number (001 to 100) with
the numeric keys.
To use this feature, you need to pre-register destinations in
coded dials.
“Registering and Editing One-Touch Keys” (P. 5-3)
Enter coded dial no.
*001
*
Press [ ] or [ ] to select
Destination>.
Press [ ] or [ ] to select
Dial>.
Correcting destinations
• To cancel a destination
Press and hold [ ] (Clear).
• To delete the last character of a destination
Press [ ] (Clear).
If you press an incorrect key
(1) Press [ ] (Clear).
(2) Press [ ] to select , and then press [OK].
* If you want to repeat the procedure from specifying the settings for the
document scanning, press [ ] (Reset).
If you press an incorrect key
(1) Press [ ] (Clear).
(2) Press [ ] to select , and then press [OK].
* If you want to repeat the procedure from specifying the
settings for the document scanning, press [ ] (Reset).