Canon ImageCLASS MF4570DN - Manual (Page 146)

9-14
Tr
oubleshooting
Paper Creases
Perform one of the following solutions according to the cause.
The paper is not loaded properly.
Solution
Load the paper properly.
“Loading Paper” (P.2-9)
Damp paper is used.
Solution
Replace the paper with new paper in an unopened package.
“Paper Requirements” (P.2-6)
Appropriate paper is not being used.
Solution
Replace the paper with which can be used with this printer.
“Paper Requirements” (P.2-6)
There is a foreign object inside the printer.
Solution Remove the foreign object inside the printer.
Depending on the paper type or the operating environment, the paper may be creased.
Solution
Change the settings from the operation panel.
e-Manual Maintenance Special Mode
The level of improvement according to the setting option is as following.
(low)
(high)
* Change of paper type or environment may reduce the curl or wrinkle problem, even without changing the setting.
* This setting is available when
• the is set to , , , or
• the is set to , , ,
, , or
* As you select an option that has higer effect, printing speed becomes slower.
Printing Is Uneven
Perform one of the following solutions according to the cause.