Canon ImageCLASS MF4570DN - Manual (Page 79)

5-9
Reg
ist
ering Destinations in the A
ddr
ess Book
You can perform the following procedures.
• Registering group addresses
• Adding a recipient to group addresses
• Deleting a recipient from group addresses
• Changing a group name
• Deleting group addresses
IMPORTANT
Before registering group addresses
• Register group addresses for an unused one-touch key or coded
dial codes. Keep a one-touch key or coded dial available for
group dialing.
• Recipients must be registered to one-touch keys or coded dial
codes before they can be added to a group.
Registering and Editing a Destination
Group via the Operation Panel
Keys to be used for this operation
OK
FAX Address Book
Back
Tone, Numeric keys
1
Press [ ].
2
Press [ ] (Address Book).
CANON01 012345678
CANON02 98765432
...
CANON03 00112233 ...
All A-Z
Registering group addresses newly
(1) Press [ ].
(2) Press [ ] or [ ] to select
Address Book>, and then press [OK].
Register New to Addr
Edit Address Book
Address Book Details
All A-Z
When the address book PIN is specified
Use the numeric keys to enter the PIN, and then press
[OK].
Address Book PIN
(Apply: Press OK)
*******
(3) Press [ ] or [ ] to select or ,
and then press [OK].
Register Location
Coded Dial
One-Touch
(4) Press [ ] or [ ] to select , and then press [OK].
Destination Type
Fax
Group
(5) If you selected in Step (3), press [ ] or
[ ] to select the number to be registered, and then press
[OK].
Enter Registration No.
01 CANON01 012345
...
02 CANON02 987654
...
03 Not Registered
04 Not Registered
(6) Press [ ] or [ ] to select , and then press [OK].
Group
Name:
Destinations: 000
One-Touch: 03
(7) Use the numeric keys to specify .
“Text Input Method” (P.1-9)
Name (Max 16 char.)
GROUP
Entry Mode: A
(8) Press [ ] or [ ] to select , and then press [OK].
Name (Max 16 char.)
GROUP
Entry Mode: A
Registering and Editing Recipients for Group Dialing