beautypg.com

System board connectors, Table a – Dell PowerEdge 2850 User Manual

Page 3

background image

 

Table A-1. System Board Jumper Settings

 

System Board Connectors

See

Figure A

-3

and

Table A

-2

for the location and description of system board connectors.

 

Figure A-3. System Board Connectors

 

Jumper

 

Setting

 

Description

PASSWD

   (default)

The password feature is enabled.

The password feature is disabled.

NVRAM_CLR

   

(default)

The configuration settings are retained at system boot.

The configuration settings are cleared at the next system boot. (If the configuration settings become corrupted to the point
where the system will not boot, install the jumper and boot the system. Remove the jumper before restoring the configuration
information.)

 

NOTE:

For the full name of an abbreviation or acronym used in this table, see the "Glossary" in the User's Guide.

See also other documents in the category Dell Computer hardware: