Dell PowerEdge R715 User Manual
Page 48
48
About Your System
TPM or TCM
configuration
operation is
pending. Press
(I) to Ignore OR
(M) to Modify to
allow this change
and reset the
system.
WARNING:
Modifying could
prevent
security.
This message displays during
system restart after a TPM or
TCM configuration
command has been entered.
User interaction is required
to proceed.
Enter I or M to proceed.
TPM or TCM
failure.
A TPM or TCM function has
failed.
Unable to launch
System Services
image. System
halted!
System halted after
keystroke because System
Services image is either
corrupted in the system
firmware or has been lost due
to system board replacement.
Restart the system and
update Lifecycle Controller
by running the Lifecycle
Controller Dell Update
Package (DUP). For more
information, see the Dell
Update Packages User's Guide
at
support.dell.com/manuals.
If the system still reports the
same error, run the Lifecycle
Controller Repair Package.
Follow the instructions
provided with the package to
complete the installation.
The iDRAC6 Enterprise card
flash memory may be
corrupted.
Unexpected
interrupt in
protected mode.
Improperly seated memory
modules or faulty
keyboard/mouse controller
chip.
Reseat the memory modules.
Memory" on page 157. If the
problem persists, see
Message
Causes
Corrective Actions
book.book Page 48 Thursday, June 3, 2010 4:35 PM