Dell PowerEdge R715 - Manual (Page 30)

30 About Your System
E1711 PCI parity
error on Bus
## Device ##
Function ##.
The system BIOS reported a
PCI parity error on a
component that resides in
PCI configuration space at
bus ##, device ##,
function ##.
Remove and reseat the
PCIe expansion cards. If
the problem persists, see
"Troubleshooting
Expansion Cards" on
page 164.
PCI parity
error on Slot
#. Review &
clear SEL.
The system BIOS reported a
PCI parity error on a
component that resides in
the specified slot.
Remove and reseat the
PCIe expansion cards. If
the problem persists, see
"Troubleshooting
Expansion Cards" on
page 164.
E1712 PCI system
error on Bus
## Device ##
Function ##.
The system BIOS reported a
PCI system error on a
component that resides in
PCI configuration space at
bus ##, device ##,
function ##.
Remove and reseat the
PCIe expansion cards. If
the problem persists, see
"Troubleshooting
Expansion Cards" on
page 164.
PCI system
error on Slot
#. Review &
clear SEL.
The system BIOS reported a
PCI system error on a
component that resides in
the specified slot.
Remove and reseat the
expansion-card riser that
provides the specified slot.
See "Expansion Cards and
Expansion-Card Risers"
on page 105. If the
problem persists, the riser
card or system board is
faulty. See "Getting Help"
on page 183.
E1714 Unknown
error. Review
& clear SEL.
The system BIOS
determined there has been
an error in the system, but is
unable to determine its
origin.
Check the SEL for more
information and then
clear the SEL. Remove
AC power to the system
for 10 seconds and restart
the system.
If the problem persists,
see "Getting Help" on
page 183.
Code Text Causes Corrective Actions
book.book Page 30 Thursday, June 3, 2010 4:35 PM