Dell PowerEdge R715 User Manual
Page 44
44
About Your System
Keyboard fuse has
failed.
Overcurrent detected at the
keyboard connector.
Local keyboard
may not work
because all user
accessible USB
ports are
disabled. If
operating
locally, power
cycle the system
and enter system
setup program to
change settings.
The USB ports are disabled
in the system BIOS.
Power down and restart the
system using the power
button, and then enter the
System Setup program to
enable the USB port(s). See
Manufacturing
mode detected.
System is in manufacturing
mode.
Reboot to take the system
out of manufacturing mode.
Memory tests
terminated by
keystroke.
POST memory test was
terminated by pressing the
spacebar.
Information only.
No boot device
available.
Faulty or missing optical
drive subsystem, hard drive,
or hard-drive subsystem, or
non-bootable USB key
installed.
Use a bootable USB key, CD,
or hard drive. If the problem
persists, see
Drive" on page 161, and
Drive" on page 162. See
information on setting the
order of boot devices.
Message
Causes
Corrective Actions
book.book Page 44 Thursday, June 3, 2010 4:35 PM