Exit screen, Entering the uefi boot manager – Dell DX6004S User Manual

Page 63

Using the System Setup Program and UEFI Boot Manager

Exit Screen

Press to exit the System Setup program; the Exit screen displays:

• Save Changes and Exit
• Discard Changes and Exit
• Return to Setup

Entering the UEFI Boot Manager

NOTE:

Operating systems must be 64-bit UEFI-compatible (for example, Microsoft

Windows Server

2008 x64 version) to be installed from the UEFI boot mode. DOS

and 32-bit operating systems can only be installed from the BIOS boot mode.

NOTE:

The Boot Mode must be set to UEFI in the System Setup program to access

the UEFI Boot Manager.

The UEFI Boot Manager enables you to:

• Add, delete, and arrange boot options
• Access the System Setup program and BIOS-level boot options without

rebooting

To enter the UEFI Boot Manager:

1 Turn on or restart your system.
2 Press after you see the following message:

= UEFI Boot Manager

NOTE:

The system will not respond until the USB keyboard is active.

If your operating system begins to load before you press , allow the

system to finish booting, and then restart your system and try again.

book.book.book Page 63 Tuesday, September 7, 2010 8:45 PM