Dell Metered PDU LCD - Manual (Page 75)

75 Web Interface Operation |
Configuring Default CSV File Opening Settings
To configure default CSV file opening settings:
1 After the configuration file is downloaded a destination on your desktop, correct the default file opening
settings as follows:
S
Click the My Computer icon and select Folder Options from the menu.
S
Select the File Type tab and select CSV as the file type.
S
Click the Advanced button, then select Open .
S
Select the Confirm open after download check box.
NOTE: Do not select the Browse in the same window option.
S
Repeat the steps to correct the default file opening settings for the file type XLS .
NOTE: After these settings are corrected, other configuration files will download properly.
2 This procedure is completed.
Configuring Network Access and Control
This section explains:
S Setting general IPv4 and IPv6 configuration options
S
Enabling TCP/IP network controls
S
Setting SNMP/HTTP access control
S
Configuring SNMP protocol settings and trap receivers
Setting General TCP/IPv4 Configuration Options
To configure TCP/IPv4:
1 From the Network menu, click Configuration . The Network Configuration page displays.
2 Locate the General TCP/IPv4 Configuration table and enter configuration values for IPv4 (see Table 21).
3 Click Save .
4 This procedure is completed.