Dell Metered PDU LCD - Manual (Page 8)

8 |
Introduction
Providing outstanding performance and reliability, the rPDU benefits include the following:
S
The rPDU can be installed as either 42U or 48U applications (depending on the model).
S The rPDU can be mounted using either factory-installed standard mounting pegs on the back of the rPDU,
or turned 90° by using user-installed deep mounting pegs on the side of the rPDU.
S
Color-coded silk screening for outlet receptacles and circuit breakers clearly associate circuit breakers with
the receptacles they protect.
S
The rPDU models provide several configurations of IEC 320 C-13 and IEC 320 C-19 outlet receptacles on
the front panel.
S
The attached power cords for all models are 3m (10 ft) with IEC60309 input connector plugs.
S
All receptacles, circuit breakers, ports, ground bonding point, and user interfaces are located on the front
panel of the rPDU for easy access.
S
The rPDUs models are configured with either Delta or Wye topology.
S The rPDU provides an environmental monitoring sensor port, a dry contact sensor port, a 10/100 Base-T
Ethernet port, and a serial communication port.
S
The LCD panel provides pushbutton controls for accessing performance monitoring data, event
notifications, and user-configured provisioning options.
S
The rPDU provides an internal Dell t Network Management Card (NMC) for network communications.
The following options are available for the rPDU:
S
Side- and front-mounted strain relief brackets for secure power cord retention (bracket type depends on
model)
S
Dry contact sensor
S
Temperature sensor
S
Temperature and humidity sensor
The rPDU provides the following meters and measurements for reporting operational status:
S
Input Voltage (V)
S
Input Frequency in Hertz (Hz)
S
Input Current in Amperes (A)
S
Input Watts (W)
S
Input Volt-amperes (VA)
S
Instantaneous Headroom Watts
S
Peak Headroom Watts (with time stamp)
S
Peak Consumption Watts (with time stamp)
S
Cumulative Kilowatt per Hour (with time stamp)
S Temperature (if an optional temperature sensor is installed)
S
Humidity (if an optional humidity sensor is installed)
S
Real-Time Clock