Dell Metered PDU LCD - Manual (Page 19)

19 Installation |
Figure 7. Installing the Deep Mounting Pegs
Installing the rPDU in the Rack Enclosure
To install the rPDU in a rack enclosure:
1 Move the rPDU into position at the rear of the rack enclosure.
2 Select the proper keyholes in the rPDU tray for mounting the rPDU.
3 Align the mounting pegs with the keyholes in wall of the rPDU tray (see Figure 8).
Figure 8. Aligning and Inserting the Standard or Deep Mounting Pegs (Top Mounting shown; Bottom Mounting not shown)
4 Fully insert both mounting pegs into the keyholes.
5 Push down to set the rPDU in place.
NOTE: A second rPDU can be installed in the same tray. The procedure is the same. See Figure 9.