Dell Metered PDU LCD - Manual (Page 68)

68 |
Web Interface Operation
Figure 32. Menu Selections
Accessing the Web Interface
The Web interface can be accessed using standard Web browsers. Up to eight users can be provided with access
to the interface, but only one administrator can be identified. Web access is enabled by default, but the
administrator can disable access for any other user.
NOTE: The rPDU defaults to using DHCP when delivered. If you are unable to connect to the rPDU through the network
connection with this default address, change the IP address using the serial interface before using any of the network
interfaces. See “Serial Interface Operation” on page 50 for more information.
To access the Web interface:
1 Open the Web browser and navigate to the IP address of the rPDU.
2 Click the Dell logo start button to log in (see Figure 33).
Figure 33. Start Button
3 Enter a valid user name and password in the Authentication Required dialog box. Click OK to continue or
Cancel to exit.
The Home page displays with a menu bar on the left and the Summary table of present values in the Main
Page on the right.
4 Click any selection in the menu bar to open the corresponding page in the Main Page.