Dell Metered PDU LCD - Manual (Page 15)

15 Installation |
Installation
This section explains:
S
Unpacking the Dell Metered Rack Power Distribution Unit (rPDU) equipment
S Equipment inspection
S
Setup and installation
S
Starting up and shutting down the rPDU
S
Front panel diagrams
Unpacking the rPDU
CAUTION: Hazard of electric shock. Unpacking the cabinet in a low-temperature environment may cause condensation
to occur in and on the rPDU. Do not install the rPDU until the inside and outside are dry.
Use care when moving and opening the carton. Leave the components packaged until ready to install.
1 Remove the top from the carton(see Figure 5).
Figure 5. Unpacking the rPDU
2 Remove the rPDU, the accessory bag, and documentation from the carton:
Grasp the rPDU and the input connector plug and set them on a flat, stable surface.
Remove the Styrofoam shipping supports from the rPDU and the wrapper from the input connector plug.
Remove the documents and the accessory bag from the inside wall of the carton.
3