Dell Acceleration Appliances for Databases - Manual (Page 95)

Name Description Data Type
fusionIoDimmInfoBeacon
Writing a true value here will
turn on the LED flashing beacon
for visual card identification. A
false value will turn the LED
beacon off.
Boolean
fusionIoDimmInfoPCIAddress
Device address on the PCI bus Display string (0-15)
fusionIoDimmInfoPCIDeviceID
Device PCI ID Display string (0-25)
fusionIoDimmInfoPCISubdeviceID
Device PCI sub-device ID Display string (0-25)
fusionIoDimmInfoPCIVendorID
Device PCI vendor ID Display string (0-25)
fusionIoDimmInfoPCISubvendorID
Device PCI sub-vendor ID Display string (0-25)
fusionIoDimmInfoPCISlot
Device PCI slot number Display string (0-16)
fusionIoDimmInfoWearoutIndicator
True = device has surpassed
the wearout threshold.
Boolean
fusionIoDimmInfoFlashbackIndicator
(relevant only
for driver 2.3.1 and earlier)
True = flashback redundancy is
degraded.
Boolean
fusionIoDimmInfoWritableIndicator
0 = Write-reduced; 1= non-
writable (read-only); 2=normal;
3=unknown
Integer (0-3)
fusionIoDimmInfoInternalTemp
Current internal temperature of
the device in degrees Celsius
Integer (-100-100)
fusionIoDimmInfoHealthPercentage
Estimate of the health of the
drive expressed as the
remaining percentage of drive
life before write rate is reduced
due to wearout. If the health
percentage is not available, the
value will be set to -1.
Integer (0-100)
fusionIoDimmInfoShortTermWearoutDate
Obsolete
fusionIoDimmInfoLongTermWearoutDate
Obsolete
fusionIoDimmInfoShortTermNonWritableDate
Obsolete
fusionIoDimmInfoLongTermNonWritable Date
Obsolete
fusionIoDimmInfoMinimalModeReason
Reason the device is in minimal
mode:
0=unknown; 1=firmware out of
date; 2=low power; 3=dual-
plane mode failed; 5=internal
error; 6=card limit exceeded;
7=device not in minimal mode;
8=unsupported OS;
9=insufficient memory;
Integer (0-13)
89