Dell XC Web-Scale Converged Appliance - Manual (Page 40)

40 Wyse Datacenter Appliance XC for vWorkspace
Figure 30 Discovery Setup
50. Click the Configure Database Details button and type the information to connect to the
vWorkspace database. Make sure to change the database instance from “VWORKSPACE” to
“MSSQLSERVER” (default instance) or type port as 1433. You can click the Test button to ensure
the details are correct, and then click OK. Click Next to continue.
Figure 31 Set Database Details
51. Click the Add button to enter information about your Web Access and Secure Gateway servers if
necessary.
52. Click the Discover Environment button to begin discovery. If a discovery has already been
completed (that is during installation) then click Next.
53. After discovery is completed, click OK, and then click Next to view different wizards and fine
tune the settings.
54. The Discovered Environment to be Monitored page displays components that were discovered.
Click Next.
55. Verify your Web Access server(s) , if already configured, and then click Next.
56. Click Next on the Discovered Secure Gateways section.