Dell XC Web-Scale Converged Appliance - Manual (Page 14)

14 Wyse Datacenter Appliance XC for vWorkspace
Figure 6 Creating Storage Pool
3. Provide a name for the pool (for example, SP1) and use all unallocated disk space. Click Save.
On the Create Container page, to view additional settings, click the Advanced Settings button.
The recommended settings are as follows:
 Replication Factor: 2
 Reserved Capacity: 4096 GB (only for the “Compute” container that contains the persistent
virtual desktops)
 Compression: Disabled
 Delay: 0 minutes
 Perf Tier Deduplication: On
 Capacity Tier Deduplication: On (Post-Process)
NOTE: If using vSphere for the hypervisor, select Mount on all hosts under the NFS Datastore section.
4. Type a name for the management container such as “ds_mgmt” and click Save. Click
+ Container to add another container for the compute/RDSH layer. Use the same advanced
settings, provide a name (for example, ds_compute or ds_rdsh) and click Save. If you are using
desktops and RDSH on the same cluster, create an additional container for logical separation.