Dell XC Web-Scale Converged Appliance - Manual (Page 58)

58 Wyse Datacenter Appliance XC for vWorkspace
7 Configuring Microsoft Failover Cluster
Perform the following tasks to complete the configuration of the Microsoft Failover Cluster.
NOTE: Microsoft Failover Cluster is required only when the hypervisor is Hyper-V.
7.1 MS Failover Cluster Quorum
The Microsoft Failover Cluster does not use any of the host drives for its configuration. For quorum,
configure a file share witness using the ds_mgmt container.
1. Log in to one of the Hyper-V hosts. In Server Manager, click Tools, and then select Failover
Cluster Manager. In Failover Cluster Manager, click the name of the cluster. Click Action on the
top menu of Failover Cluster Manager, click More Actions, and then select Configure Cluster
Quorum Settings.
2. On the Before You Begin window, click Next.
3. Select Select the quorum witness and click Next.
4. Select Configure a file share witness and click Next.
5. Type the path to your ds_mgmt share (that is \\cluster\ds_mgmt) and click Next.
6. On the confirmation page, click Next and click Finish to complete.
7.2 Setting up MS Failover Cluster Network
To view the cluster network settings, expand Networks in Failover Cluster Manager.
For each network available, right-click and select Properties to change the name. In the following
example, this network is associated with the cluster VLAN and renamed it to Cluster.