beautypg.com

Compaq PROLIANT ML370 User Manual

Page 62

background image

3-8 Compaq ProLiant ML370 Maintenance and Service Guide

Table 3-2

POST Error Messages

Error Code

Audible Beeps

Probable Source of Problem

Recommended Action

A Critical Error
occurred prior to this
power-up

None

A catastrophic system error,
which caused the server to
crash, has been logged.

Run Diagnostics. Replace failed
assembly as indicated.

Unsupported
Processor Detected
System Halted

1 long, 1 short

Processor not supported by
current system ROM

Check documentation for
supported processors, and if
supported, remove the
processor and update the
system to latest ROM.

FATAL ROM ERROR:
The System ROM is
not properly
programmed

1 long, 1 short

ROM programmed in factory
incorrectly

Replace the physical ROM part.

101 - ROM Error

1 long, 1 short

System ROM checksum

Run Diagnostics. Replace failed
assembly as indicated.

101 - I/O ROM Error

None

Options ROM checksum

Run Diagnostics. Replace failed
assembly as indicated.

102 - System Board
Failure

None

DMA, timers, and so on

Replace the system board. Run
the Compaq System
Configuration Utility.

104 - ASR-2 Timer
Failure

None

System board failure

Run Diagnostics. Replace failed
assembly as indicated.

105 - Current System
ROM is corrupt—
now booting
redundant System
ROM

2L

Non-booted ROM image is
corrupt

Flash the ROM utilizing
ROMPaq.

162 - System
Options Not Set

2S

Configuration incorrect

Run the System Configuration
Utility and correct.

163—Time & Date
Not Set

2S

Invalid time or date in
configuration memory

Run the System Configuration
Utility and correct.

164 - Memory Size
Error

2S

Configuration memory incorrect

Run the System Configuration
Utility and correct.

172 - Configuration
Nonvolatile Memory
Invalid

None

Nonvolatile configuration corrupt
or jumper installed

Run the System Configuration
Utility and correct.

173 - Slot ID
Mismatch

None

Board replaced, configuration not
updated

Run the System Configuration
Utility and correct.

174 - Configuration/
Slot Mismatch Device
Not Found

None

PCI board not found

Run the System Configuration
Utility and correct.

continued