Baumer CombiLyz AFI4 - Manual (Page 2)

www.baumer.com Operators Instruction: 11126179 00 Page 2 / 36
Operators Instruction
Electrical specifications Technical specifications
Housing FlexHousing, Ø80 mm
Material Stainless steel, AISI 304
Process connection G1A, rotating
(for other connections see adapters page 4)
Insertion length Standard 37 mm / 3A version 40,5 mm
Long version 83 mm / 3A version 87 mm
Material Not wetted Stainless steel AISI 304
Wetted parts 37… mm PEEK natura
83... mm PEEK narura+AISI 316L
Surface Wetted parts Ra <0,8 µm
Measuring range Conductivity 0...500 µS/cm … 0…1.0 S/cm
14 selectable ranges
Concentration 4 factory set medias/ranges
1 customer defined media/range
Temperature -30...150°C
Free programmable range
Accuracy Cond./conc. 0...500 µS/cm ≤1,5%
(sensor incl. transmitter) 0...1 / 0...500 mS/cm ≤1,0%
0...1 S/cm ≤1,5%
Temperature ≤0,4% selected range
Temperature compensation 0,0...5,0%/°C, free adjustable
Compensation range -20...150°C
Reference temperature 25°C (adjustable)
Response time Cond./conc. <2,0 seconds
Temperature, t
90
<15 seconds
Start up time without display ≤10 seconds
Start up time with display ≤15 seconds
General specifications
Media temperature -20...140°C
150°C up to 1 hour
Media pressure <10 bar (helium tested)
Ambient temperature Without display -40...85°C
With display -30...80°C
Isolation voltage 500 VAC
Protection class IEC 529 IP 67 / IP 69K
Humidity IEC 68.2.38 98% condensing
Vibrations IEC 60068.2.6 - test Fc
1,0 mm (2-13,2 Hz) 0,7g (13,2-100 Hz)
Power supply 15...35 VDC
Output Cond./Conc. 4...20 mA
4...20 mA + HART ® (pending)
Temperature 4...20 mA
Relay 2 relays included in the display
Temperature drift ≤0,1%/°C
El. connection Left side M12, 5-pin
M16 or M20 cable gland
Right side M12, 5-pin (4...20 mA output only)
M12, 8-pin (4...20 mA + relay output)
M16 or M20 cable gland
Material Plastic
Stainless steel
Apply to EU directives 10/2011, 1935/2004, 2023/2006
FDA PEEK: CFR 21.177.2415
Approvals 3A approval 74-06
EHEDG (pending)
Compliance and approvals
Product marking
The marking on the product is made by laser engraving.
Below see example:
Contacts 2 × solid state relays
Voltage 60 V
p
Relay
Display
Type FSTN Graphically LCD
Measuring range -9999...99999
Digit height Max. 22 mm
Temperature drift ≤0,0001%/°C inside optimal range
-10...70°C
≤0,00015%/C outside optimal range
-30…-10 / 70...80°C
Mechanical data
Material Polycarbonate plastic
Protection class IP 10 on terminals
IP67/IP69K in FlexHousing
English
CombiLyz, AFI4