Brake force display – BMW 760Li Sedan 2010 User Manual
Page 99
System limits
Personal responsibility
The system cannot serve as a substitute
for the driver's personal judgment of the traffic
situation.
In the event of a warning, do not jerk the steering
wheel, as you may lose control over the vehi‐
cle.◀
The system may not be fully functional in situa‐
tions such as the following:
▷
When a vehicle is approaching at a speed
much faster than your own.
▷
In heavy fog, rain or snowfall.
▷
In tight curves or on narrow lanes.
Malfunctions
Steering wheel vibration
Frequent activation of the steering wheel vibra‐
tion causes the system to overheat.
This causes Active Blind Spot Detection to be‐
come deactivated.
Let the system cool and reactivate it by pressing
the button.
Radar sensors
The radar sensors are located under the rear
bumper.
The system may not be fully functional in situa‐
tions such as the following:
▷
Dirty or icy bumper.
▷
Stickers on the bumper.
A message is displayed when the system is not
fully functional.
For US owners only
The transmitter and receiver units comply with
part 15 of the FCC/Federal Communication
Commission regulations. Operation is governed
by the following:
FCC ID:
▷
NBG009014A.
Compliance statement:
This device complies with part 15 of the FCC
Rules. Operation is subject to the following two
conditions:
▷
This device may not cause harmful interfer‐
ence, and
▷
this device must accept any interference re‐
ceived, including interference that may
cause undesired operation.
Any unauthorized modifications or changes to
these devices could void the user's authority to
operate this equipment.
Brake force display*
The concept
▷
During normal brake application, the outer
brake lamps light up.
▷
During heavy brake application, the inner
brake lamps light up in addition.
Seite 99
99
Online Edition for Part no. 01 41 2 602 638 - © 09 09 510 BMW AG