BMW 760Li Sedan 2010 User Manual
Page 79
Resetting average values
Press and hold the button on the turn signal
lever.
Distance to destination
The remaining distance to the destination is dis‐
played if one of the following measures was
taken before starting the trip:
▷
A distance was entered in the computer.
▷
A destination was entered in the navigation
system*.
The distance to the destination on the plan‐
ned route of the navigation system is
adopted automatically.
The distance entered in the computer is
overwritten after approx. 1,640 ft/500 m.
Manually setting the distance to the
destination
1.
"Vehicle Info"
2.
"Onboard info"
3.
"To dest."
4.
Turn the controller until the desired distance
is displayed.
5.
Press the controller.
Time of arrival
The estimated time of arrival is
displayed if the following infor‐
mation was entered before start‐
ing the trip:
▷
A distance in the computer.
▷
A destination in the navigation system*.
The time must be correctly set.
Speed limit
Display of a speed limit which, when reached,
should cause a warning to be issued.
Renewed warning if the vehicle speed drops be‐
low the set speed limit once by at least 3 mph/
5 km/h.
Displaying, setting or changing the
limit
1.
"Settings"
2.
"Speed"
3.
"Warning at:"
4.
Turn the controller until the desired limit is
displayed.
5.
Press the controller.
The speed limit is stored.
Activating/deactivating the limit
1.
"Settings"
2.
"Speed"
3.
"Warning"
4.
Press the controller.
Applying your current speed as the
limit
1.
"Settings"
2.
"Speed"
3.
"Select current speed"
4.
Press the controller.
The current vehicle speed is stored as the
limit.
Seite 79
79
Online Edition for Part no. 01 41 2 602 638 - © 09 09 510 BMW AG