BMW 760Li Sedan 2010 User Manual
Page 117
Signal tones
When approaching an object, an intermittent
tone is sounded that indicates the position of the
object. For example, if an object is detected to
the left rear of the vehicle, a signal tone sounds
from the left rear speaker.
The shorter the distance to the object becomes,
the shorter the intervals.
If the distance to a detected object is less than
approx. 12 in/30 cm, a continuous tone is
sounded.
If objects are located both in front of and behind
the vehicle, an alternating continuous signal is
sounded.
The intermittent tone is interrupted after approx.
3 seconds:
▷
If the vehicle stops in front of an object that
is detected by only one of the corner sen‐
sors.
▷
If moving parallel to a wall.
The signal tone is switched off:
▷
When the vehicle moves away from an ob‐
ject by more than approx. 4 in/10 cm.
▷
When transmission position P is engaged.
Volume
You can set the
volume of the PDC signal tone,
.
The setting is stored for the remote control cur‐
rently in use.
Visual warning
The approach of the vehicle to an object can be
shown on the Control Display. Objects that are
farther away are displayed on the Control Dis‐
play before a signal tone sounds.
The display appears as soon as PDC is acti‐
vated.
If the backup camera image was selected last, it
again appears on the display. To switch to PDC:
1.
"Switch off rear view camera" Select the
symbol on the Control Display.
2.
Press the controller.
The setting is stored for the remote control cur‐
rently in use.
Display on the Control Display
Switching on the backup camera via the
iDrive
With PDC activated:
1.
"Switch on rear view camera" Select the
symbol.
2.
Press the controller.
The backup camera image is displayed. The set‐
ting is stored for the remote control currently in
use.
Malfunction
A
Check Control message, refer to page 83,
is
displayed in the instrument cluster.
Seite 117
117
Online Edition for Part no. 01 41 2 602 638 - © 09 09 510 BMW AG