BMW 760Li Sedan 2010 - Manual (Page 62)

3. Mount the child restraint fixing system; refer
to the operating instructions of the system.
4. Ensure that both LATCH anchors are prop‐
erly connected.
5. After mounting, move the backrest back up
slightly so that the child restraint fixing sys‐
tem rests lightly against the backrest.
Child restraint fixing systems with a
tether strap
Mounting points
Depending on the vehicle equipment, there are
two outer or three mounting points for child re‐
straint fixing systems with a tether strap.
LATCH mounting eyes
Only use the mounting eyes for the upper
LATCH retaining strap to secure child restraint
fixing systems; otherwise, the mounting eyes
could be damaged.◀
Retaining strap guide
LATCH retaining strap
Make sure that the upper LATCH retaining
strap is not routed over sharp edges and is free
of twisting on its way to the upper mounting
point; otherwise, the belt cannot properly se‐
cure the child restraint fixing system in an acci‐
dent.◀
1 Direction of travel
2 Head restraint
3 Hook for upper retaining strap
4 Mounting point/eye
5 Rear window shelf
6 Seat backrest
7 Upper retaining strap
Attaching the upper retaining strap to
the mounting point
1. Remove the mounting point cover.
2. Raise the head restraint. Do not change the
middle head restraint*.
3. Guide the upper retaining strap between the
supports of the head restraint.
Guide it over the head restraint of the middle
seat.
4. Attach the hooks of the retaining strap to the
mounting eyes.
5. Pull the retaining strap taut.
6. Lower the head restraint.
Seite 62
62
Online Edition for Part no. 01 41 2 602 638 - © 09 09 510 BMW AG
Transporting children safely