BMW 760Li Sedan 2010 - Manual (Page 115)

Press the rocker switch up or down repeatedly
until the desired speed is set, regardless of
whether the system is currently active or has
been interrupted.
If active, the displayed speed is stored and the
vehicle reaches the stored speed if the road is
clear.
▷ Each time the rocker switch is pressed to the
point of resistance, the desired speed in‐
creases or decreases by approx. 1 mph/
1 km/h.
▷ Each time the rocker switch is pressed past
the point of resistance, the desired speed
increases or decreases by a maximum of
5 mph/10 km/h.
Hold the rocker switch in position to repeat the
action.
The rocker switch can be pressed while inter‐
rupted to maintain and store the current speed.
Desired speed
Press the button.
The stored speed is reached and maintained.
Displays in the instrument cluster
1 Display of desired speed
2 Indicator lamp
3 Brief status display
Desired speed
Display in the speedometer:
▷ The marking lights up in
green: the system is active.
▷ The marking lights up in or‐
ange: the system has been
interrupted.
▷ The marking does not light up: the system is
switched off.
Brief display in the speedometer:
Selected desired speed
If --- appears briefly, conditions may not be ad‐
equate to operate the system.
PDC Park Distance Control*
The concept
In addition to the PDC Park Distance Control, the
backup camera*, refer to page 118, can be
switched on.
PDC supports you when parking. Objects that
you are approaching slowly in front of or behind
your vehicle are indicated with:
▷ Signal tones.
▷ Visual display.
Seite 115
115
Online Edition for Part no. 01 41 2 602 638 - © 09 09 510 BMW AG
Reference
Mobility
Communication
Entertainment
Navigation
Driving tips
Controls
At a glance