BMW 760Li Sedan 2010 User Manual
Page 123
Display
Heat image
For safety reasons, when driving at speeds
above approx. 3 mph/5 km/h and in low ambient
light, the image is only displayed when the low
beams are switched on.
A still image is displayed at regular intervals for
a fraction of a second.
Night Vision with pedestrian detection is not
available on the rear screen.
Pedestrian detection
Environmental influences can limit the availabil‐
ity of pedestrian detection. If pedestrian detec‐
tion is not available, a symbol is displayed in the
heat image.
This symbol disappears when the function be‐
comes available again.
The pedestrian detection and warning function
only operates while the heat image is being dis‐
played.
Adjustments via the iDrive
With Night Vision switched on:
1.
Activate Night Vision with pedestrian detec‐
tion.
2.
Press the controller.
3.
Open the desired menu item.
▷
"Brightness"
▷
"Contrast"
▷
"Pedestrian detection"
The settings are stored for the remote control
currently in use.
Camera
Rain, dirt, snow, or ice can impair camera oper‐
ation.
The camera is automatically heated when the
external temperatures are low.
The camera is automatically cleaned together
with the headlamps.
Clean the lens, refer to page 252
Seite 123
123
Online Edition for Part no. 01 41 2 602 638 - © 09 09 510 BMW AG